Custom badge manufacturers: What are the different material types of badges?

by:Ipromo     2021-06-20

In short, the badge is worn to show identity, profession, and honor. It is very common in our daily life. What are the different material types? The following is the introduction of badge manufacturers.

1. Badge manufacturer: paint badge. The surface can be covered with a transparent protective resin. This process is usually referred to as 'glue drop'. Please note that the surface of the badge will become brighter after the drop of glue is applied due to light refraction. But after adding resin, the unevenness of the paint badge will disappear, but the trademark can be protected. In contrast, the surface of the imitation enamel badge is flat, and the lines on the surface of the badge can be plated with various metal colors such as gold, silver, etc., giving a large picture effect of imitation enamel.

2, badge manufacturer: imitation enamel badge. The production process is similar to the enamel badge (cloisonne badge), but the difference from the real enamel is that the badge uses different enamel pigments (one is real enamel pigment, the other is synthetic enamel pigment and imitation enamel pigment). Imitation enamel badge, exquisite workmanship, enamel color and surface smooth, particularly delicate, giving a very high-end luxury feeling. If you want to make exquisite high-end badges, please choose imitation enamel badges.

3, badge manufacturers: stamping badges. Commonly used badge materials, such as copper, zinc alloy, aluminum, iron, etc. , Can also be called a metal badge. Among them, because copper is relatively soft and suitable for making badges, copper embossed badges have clear lines, followed by zinc alloy badges, and the corresponding copper embossed badges are more expensive. The surface of the stamped badge can be subjected to various electroplating effects, including gold plating, nickel plating, copper plating, bronze plating and ancient silver. The concave part of the seal badge can also be processed into a matte effect.

4, badge manufacturers: printing badges. Divided into screen printing and flat printing. It is often referred to as a 'epoxy badge' because the last step of the badge is to add a layer of transparent protective resin to its surface. The materials used are mainly stainless steel and bronze. The back is bronze, the copper or stainless steel surface of the printed badge is not electroplated, and it is treated with natural color or wire drawing. Screen printing badges are mainly aimed at simple graphics and fewer colors. Lithographic printing: suitable for complex patterns, more colors, especially gradient colors.

The above is the relevant introduction of the badge manufacturer, I hope it can help you understand the badge better.

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...